Intruder Detection System
PIR Detector
LCD Display Pad
Alphanumeric LCD message display keypad

An intruder detection system is designed to function through the strategic positioning of motion detectors and other sensors, which detect movement, noise, vibration, breaking glass etc. within a room and come in many forms.

The most common is PIR (Passive Infra-red) which detects body heat motion.

Intruder detection is an excellent way to protect your valuable belongings and items that can never be replaced regardless of insurance. It can be set in the 'stay' mode to give protection of unused areas when you are home or fully armed to give complete coverage of all protected areas when you are out. This system is not so suitable if personal security is also an issue. In that instance we strongly recommend Perimeter security as detailed previously.

With the system armed in away, (full), mode, the two main entry points (generally garage and front foyer areas) are on delayed activation, (normally 60 - 90 seconds), to allow authorised entry to, or exit from the premises without activating the alarm. All other zones are programmed to activate immediately upon the detection of an intruder.

This is all connected to a state-of-the-art main central processor to form the heart (and brains), of your system with an in-built digital dialler, zone expansion, automatic alarm recycle, full self diagnostics including low battery, fail to communicate, power failures, etc.

We usually situate this panel in a service room or other such discrete place as fits in with the premises design, provided conditions within this area are acceptable to the system specifications of operation, and expander modules are located discretely within cupboards as required.

These systems are fully partitionable into 8 completely separate areas and activated by up to 99 four or six digit user access codes, which will allow you the ability to assign personal codes to all users.

They are fully programmable either locally through the Alphanumeric LCD message display keypads or remotely utilising the telephone interface, allowing addition or deletion of codes, programming of area restrictions, adjustable entry / exit delays, remote monitoring, and upload / download facilities.

Connection to the telephone line for monitoring and maintenance is standard practice for all our systems, although the decision to go 'on-line' to any preferred monitoring company remains yours.

Although State-of-the-Art, our systems are very easy you to operate. Arming the system either fully or partially can be as simple as the press of a button.

Discretely mounted internal piezo sirens are proposed to provide the dual role of alerting you to smoke detection and to create an unpleasant environment that will cause an intruder to leave immediately.

Included in this system is the ability to interface into the lighting circuits, (using the appropriate relays) which will cause lights to switch on should an activation of the alarm system take place.

Combining all these different forms of technology is what makes a Security Concepts system such formidable protection for your home.

Return to top of page

Unit D, Cain Commercial Centre, 20 Cain Rd, Penrose. PO Box 12-775, Penrose, Auckland 1006, NZ
Tel: 09 579 9636 Fax: 09 579 9846 Email: info@securityconcepts.co.nz